SN2A1R503 [KYOCERA AVX]

Data Line Filter, 1 Function(s), 100V, 10A,;


型号：	SN2A1R503
厂家：	KYOCERA AVX
描述：	Data Line Filter, 1 Function(s), 100V, 10A, LTE
文件：	总6页 (文件大小：85K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Bolt Style EMI Filters

SN Series – 12-32 Thread - Hermetically Sealed –

Circuits Available – C, L, ¹

APPLICATIONS

The SN series offers effective filtering

from 1 MHz to 10 GHz. Glass sealed on

both ends for hermeticity, this series is

impervious to high moisture, solvents, or

other severe environmental conditions

commonly encountered in military applica-

tions. It is designed for bulkhead mounting

with nut and lockwasher supplied.

no-load to full rated load. They are most

effective when placed in high impedance

circuits. The ¹-section designs exhibit

sharper roll-off in filter characteristic and

perform effectively when used in medium

to low impedance circuits.

Alternate lead configurations or special

capacitance values and voltage ratings

may be ordered.

The feedthru designs yield constant filter-

ing as current level is increased from

CHARACTERISTICS

• The hermetic bolt-style design was

developed to meet or exceed the

applicable portions of MIL-F-28861/10.

The filter is assembled with a glass her-

metic seal on both ends. The rugged

monolithic capacitor element is a low

inductance design that yields superior

bypass performance. The ¹-section

design contains two capacitor elements

together with a ferrite bead inductor.

• Certain feedthru designs are rated for

115 VAC/400 Hz applications. The 200

VDC ¹-section design is rated for DC

applications only.

SPECIFICATIONS

1. Plating: Silver standard – Electro-tin or gold

available

STANDARD CONFIGURATION

2. Material:

Case: Cold rolled steel standard, brass available

Leads: Copper nailhead standard. Only available

in .032" diameter. Beryllium copper lead

available. Straight lead available.

3. Operating Temperature Range:

-55°C to +125°C

.220

MAX.

.250

±.010

.216-32 UNEF-2A

(12-32)

.040

MAX.

.032 ±.002

4. Electrical Characteristics:

A. Capacitance: Guaranteed Minimum Value

(GMV) as listed

B. Insulation Resistance:

.250

±.005

.311

±.005

At 25°C: 1,000 megohm-microfarad

min., or 100,000 megohms

.343

±.020

.921

±.020

min., whichever is less

At 125°C: 100 megohm-microfarad

min., or 10,000 megohms

CIRCUIT DIAGRAMS

min., whichever is less

C. Dielectric Withstanding Voltage (DWV):

R-level designs:

2.0 times rated voltage

Class B, Class S designs:

L₂

2.5 times rated voltage

SN2

SN1

SN3

D. DC Resistance (DCR): .01 ohm, maximum

E. Voltage Drop: 0.1 volt, maximum

F. Dissipation Factor (DF): 3% maximum

G. Rated Current: 10 Amps, maximum

5. Seal: In accordance with MIL-F-28861.

Leakage rate for Class S designs shall not

exceed 1 x 10^-7atm cc/sec.

Notes:

millimeters (inches)

0.05 (.002) 1.85 (.073)

0.13 (.005) 3.99 (.157)

0.18 (.007) 5.49 (.216)

0.25 (.010) 6.12 (.241)

0.51 (.020) 6.35 (.250)

0.58 (.023) 7.90 (.311)

0.79 (.031) 8.71 (.343)

0.81 (.032) 9.45 (.372)

1.02 (.040) 9.73 (.383)

1.14 (.045) 23.39 (.921)

1. Metric equivalent dimensions

given for information only.

6. Marking: Standard (AVX symbol, AVX part

number)

7. Installation: Filter is supplied with mounting nut

and lockwasher. The recommended mounting

torque is 64 oz-in. ± 4 oz-in. Refer to the

“Installation and Handling” section for additional

information.

1.60 (.063)

—

(See Note 1)

Bolt Style EMI Filters

SN Series – 12-32 Thread - Hermetically Sealed –

Circuits Available – C, L, ¹

SPECIFICATIONS

Insertion Loss²Per MIL-STD-220, +25°C

AVX

P/N

MHz

100

MHz

200

MHz

GHz

CKT

CAP¹

.20

Voltage

DCR

.01

MHz

SN1C1-204

SN2C1-204

SN3C1-124

SN1A1-503

SN1A1-104

SN2A1-503

SN3A1-753

SN1L1-102

SN1L1-502

SN1L1-103

SN1L1-253

SN2L1-102

SN2L1-502

SN2L1-103

SN3B1-152

SN3B1-123

–

.20

.12

.05

100

.10

100

.05

100

.075

1000

5000

.01

100

200*

200

–

.025

1000

5000

.01

–

1500

.012

–

200

–

* Rated 200 VDC or 125 VAC/400 Hz

Decimal point values indicate capacitance in microfarads.

Non-decimal point values indicate capacitance in picofarads.

Insertion loss limits are based on theoretical values.

Actual measurements may vary due to internal capacitor

resonances and other design constraints.

Screw & Locking Washer Table

HEX NUT AND INTERNAL TOOTH LOCKWASHER

THREAD

HEX NUT

WASHER

Size Thread

Hex Nut

Lockwasher

4-40 UNC-2B

(.112-40)

.187*

.180

.257

.241

.067*

.057

.083

.073

.225*

.215

.265

.255

.020*

.010

.018

.012

(STD)

(ALT)

8-32 UNC-2B

(.164-32)

.250*

.241

.313

.307

.083*

.073

.114

.104

.285*

.275

.336

.325

.025*

.015

.025

.015

(STD)

(ALT)

10-32 UNF-2B

(.190-32)

.250

.241

.345

.336

.080

.070

.130

.120

.311

.300

.381

.370

.023

.013

.027

.017

(STD)

(ALT)

12-32 UNEF-2B

(.216-32)

.250

.241

.250*

.241

.083

.073

.073*

.063

.383

.372

.383*

.372

.023

.013

.023*

.013

(STD)

(ALT)

1/4-28 UNF-2B

(.250-28)

.311*

.308

.096*

.091

.408*

.396

.021*

.015

5/16-24 UNF-2B

(.312-24)

.377*

.365

.096*

.091

.435*

.425

.027*

.017

*Used for MIL-F-28861 units.

Thread

Recommended Mounting Torque

(.112-40)

4-40 UNC-2A

32 oz-in. ± 4 oz-in.

(.164-32)

64 oz-in. ± 4 oz-in.

44 oz-in. ± 4 oz-in.

60 oz-in. ± 4 oz-in.

8-32 UNC-2A

(.190-32)

10-32 UNC-2A

(.216-32)

12-32 UNEF-2A

(.250-28)

1/4-28 UNF-2A

(.312-24)

5/16-24 UNF-2A

How To Order

Notes

NOTE 1:

CAPACITANCE CODE

All AVX Filters part numbers, with exception of certain cylin-

drical styles, show total filter capacitance using the 3-digit

EIA code. The first two digits are significant: the last digit is

the multiplier.

NOTE 4:

VOLTAGE CODES AND FILTER

VOLTAGE RATINGS

IMPORTANT: please contact AVX Filters Applications

Engineering when considering DC-rated filter designs for

possible use in AC applications. As a general rule, DC

designs may be derated for AC applications. Let us assist

you.

Example:

103=10000 picofarads

125=1200000 picofarads

(1.2 microfarads)

The voltage code letters must be selected consistent with

the capabilities as outlined in the product selection tables for

a given filter type. It is important to note that the same code

letter may signify a different voltage rating depending upon

filter type. For example: the “L” code signifies a 200

VDC/125 VAC rating for a bolt-style filter, but it describes a

300 VDC/125 VAC design when applied to a JD-style filter.

It is important to note that ¹ filters and multisection filters are

described using the EIA code from the standpoint of total

capacitance. Capacitance is understood to be specified

as “guaranteed minimum value” (GMV) unless otherwise

specified. AVX Filters can supply ±20% or other specified

tolerances at an additional charge. Contact AVX Filters

Applications Engineering for further information.

NOTE 5:

NOTE 2:

RELIABILITY CODES

The customer must select the reliability code to be consis-

tent with the filter application. As a minimum, all catalog

filters are available as R-level designs.

TERMINAL AND LEADWIRE CODES

Non-standard terminal configurations including special

materials or finishes are available. Please indicate a descrip-

tion and/or outline drawing when requesting a non-standard

terminal (code “3”).

Options:

“-” signifies an R-level filter design without the optional

R-level high-rel screening

NOTE 6:

SPECIAL INFORMATION FOR

CYLINDRICAL STYLE FILTERS

“R” R-level design with optional R-level high-rel screening

also specified

L-section filter designs must be specified with regard to

“standard” or “reverse” configuration. The L-section filter is

normally utilized with the capacitor on the high impedance

side of the circuit and the inductor looking into the low

impedance side. Compact filter types such as the BK2

or CK2 button filters with ferrite bead inductors are only

supplied with the bead assembled into the threaded end.

GK2 and JD2 L-section filters are normally supplied with

a schematic or other marking to indicate location of the

inductor.

“B” Class B design with Group A screening per M28861 for

Class B filters

“S” Class S design with Group A screening per M28861 for

Class S (space grade) filters

Please refer to the catalog section on Reliability for additional

information on how to select reliability codes.

NOTE 3:

SPECIAL DESIGN CODE

(ASSIGNED BY AVX FILTERS)

A special suffix to the standard part number will be added by

AVX Filters Applications Engineering to describe special

designs or designs that are controlled by customer specifi-

cations. It is important to note that even in those instances

where a customer drawing describes a standard catalog

design it is AVX Filters policy to assign a special part number

to the customer drawing for configuration control.

AC-rated catalog designs incorporate reduced values of

capacitance to limit reactive current heating (and subsequent

filter temperature rise) to safe levels. Do not specify a

DC-rated filter with larger capacitance for an AC application

without contacting AVX Filters Applications Engineering.

How To Order

Part Number Construction

SOLDER-IN STYLE

–

Glass Seal

Orientation

S - Standard

R - Reverse

Q - Hermetic

(Glass Both

Sides)

N - No Glass

(Epoxy Both

Sides)

Voltage

A - 100 VDC

B - 200 VDC

C - 50 VDC

E - 400 VDC/

230 VAC

F - 500 VDC

G - 1000 VDC

K - 250 VDC

L - 300 VDC or

200 VDC/

Reliability

Code

See Notes

Use “H”

to specify

Hi-

Temperature

(300°C)

Rated

Design

Y - Solder

Basic Style

Circuit

0 - Non-Feed

Thru Post

1 - Feed Thru

2 - L-Section

3-Digit

Capacitor

Code

Special

Design

(Customer

DWG. or QPL

Designation)

Lead

2 - Nickel Iron

(Standard)

3 - Special

4 - Aluminum

115 VAC

M - 350 VDC

N - 70 VDC

(In pF)

Compatible with

seating flange

(Std. Lead)

5 - Aluminum

Compatible with

seating flange

(Special Lead)

D - Aluminum

Compatible with

centering flange

(Std. Lead)

E - Aluminum

Compatible with

Centering flange

(Special Lead)

F - Aluminum

Compatible with

Special Design

BOLT STYLE

–

Reliability

Code

(-See Note 2)

Special Design

(-See Note 3)

Circuit

1 - Feedthru (C)

2 - L-Section (L)

Voltage

A - 100 VDC

B - 200 VDC

3 - PI-Section (¹) C - 50 VDC

F - 500 VDC

G - 1000 VDC

H - 150 VDC

J - 600 VDC

K - 250 VDC

L - 200 VDC/

Basic Style

SA-4-40

SG-6-32

SB-8-32

SM-8-32

SH-10-32 Epoxy Sealed

SJ-12-28 Epoxy Sealed

SC-12-32 Epoxy Sealed (.187 Hex)

SP-12-32 Epoxy Sealed (.250 Hex)

SN-12-32 Hermetic Sealed

SL-1/4-28 Epoxy Sealed

3-Digit Capacitor

Code

(-See Note 1)

Terminal

1 - Copper

2 - Steel

3 - Special Lead

Design

125 VAC

M - 350 VDC

N - 70 VDC

Epoxy Sealed

Hermetic Sealed

4 - Beryllium

Copper

SD-5/16-24 Epoxy Sealed

SF-5/16-32 Epoxy Sealed

How To Order

Part Number Construction

CYLINDRICAL STYLE

–

S07

Thread

Length

A - .187" (See Notes)

B - .312"

Reliability

Code

Special Design

(Customer DWG.

or QPL

Basic Style

A - Button Type

(.410 Dia.)

B - Button Type

(.375 Dia.)

Thread Type

K - 1/4-28 Herm 0 - Feedthru Lead A - 100 VDC

Seal

L - 1/4-28 Epoxy

Seal

M - 8-32 Herm

Seal

N - 12-32 Herm

Seal

Circuit

Voltage

(without

Capacitor)

1 - Feedthru

Capacitor

2 - L-Section

Filter

B - 200 VDC

C - 50 VDC

E - 400 VDC/

230 VAC

F - 500 VDC

G - 1000 VDC

H - 150 VDC

J - 600 VDC

K - 250 VDC

L - 200 VDC/

125 VAC

Designation)

Feedthru’s &

BK2, CK2

All Other

Circuit Types

C - Extended

Button

G - .375" Dia.

J - .690" Dia.

H - .410" Dia.

F - .250" Dia.

Q - Special

X X X

Capacitance In

Picofarads

3 - PI Filter

4 - T-Section

T - 1/4-28

Post Terminal 5 - Double

(Both Ends)

V - 1/4-28 Post 6 - Five Element

and Flag

Terminal

X - 1/4-28 Hex

Adaptor

Current Rating

L-Section

Circuit

Code

Current

S - Standard L

(Inductor at

Thread End)

R - Reverse L

(Capacitor at

Thread End)

P - PI-Circuit

M - Multi

.06 AMP

Cap Input

7 - Five Element

IND Input

8 - Special Ckt.

Design

(Except JD

Series

300 VDC/

.15

.25

.45

.75

1.5

125 VAC)

M - 350 VDC

N - 70 VDC

Section

T - T Circuit

Please contact the factory for Filter Plates

and other custom product part numbers.

NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information and

data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement

and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be

required. Specifications are typical and may not apply to all applications.

SN2A1R503 [KYOCERA AVX]

相关型号：

UL1042

ZXFV201

ZXFV201N14

ZXFV201N14TA

ZXFV201N14TC

ZXFV202E5

ZXFV202N8

ZXFV203N14

ZXFV301N16(1)

ZXFV302N16

ZXFV4089

ZXFV4089N8